Yixing Steel Pole International Trading Co., Ltd

Steel Pole manufacturers / suppliers, offering Steel Pole, Lighting Pole, High Mast, Electric Power Pole, Stainless Steel Flange, Pneumatic Locking Mast and so on.

About Us

Yixing Steel Pole International Trading Co., Ltd
Address: Wenzhuang Road Yixing Technical and Economic Develop Area, Wuxi, Jiangsu, China
Member Since: 2017
Main Markets: Africa , Americas , Asia , Europe , Middle East , West Europe

Contact Us

Mobile:
Tel:
Fax:

Ms. Melody Liu

Skype:

Contact Us
Recommended Products
New Products
Conical Steel Lighting Pole

Certificate: ISO9001:2008

Product Description: Advantages for our Conical Steel Lighting Pole 1) Higher quality lower cost to win the competitive price 2) 3 production lines to ensure fast delivery 3) Skilled manufacturer, quality control and technical team 4) Warranty of quality : more than 20 years Production Process for our Conical Steel Lighting Pole Material preparation-bending-welding-repair and grinding-reforming-flushing-fix bottom plate-welding bottom plate-opening door-welding door strip, electric strip, and locking-bending arm-hot dip galvanization-plastic powder painted-inspection-shipment. Products Specification: Height From 6 meter to 18 meter Suit for Airport, seaport, stadium, highway, roadway, supermarket, parking lot, etc Shape Polygonal, Conical or Column Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Lamp power 20 W- 1000 W (HPS/MH) 220V (+-10%) /50Hz Tolerance of the dimension According to client`s requirement. Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by client required. Joint of Poles Slip joint, flange connected Standard ISO 9001:2008 Length of per section Within 14 meter once forming Welding Standard AWS (American Welding Society ) D 1.1 Thickness 1 mm to 36mm Production Process Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages Packages Packing with plastic paper or according to client`s request.

115kV Steel Power Pole

Certificate: ISO9001:2008

Product Description: General Information for our 115kV Steel Power Pole:   Type Straight Pole ,Tensile Pole ,Turn Pole Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical   Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of dimenstion +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg appliced to 50cm from the to pole Marks Nane palte through rivert or glue ,engrave ,emboss as per customer requirement Surface treatment Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. Joint of Poles Insert mode,innerflange mode,face to face joint mode . Design of pole Against earthquake of 8 grade Wind Speed 160 Km/Hour . 30 m /s Minimum yield strength 355 mpa Minimum ultimate tensile strength 490 mpa Max ultimate tensile strength 620 mpa Standard ISO 9001 Length of per section Within 14m once forming without slip joint Welding We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 Thickness 1 mm to 30 mm Production Process Rew material test → Cuttingj →Molding or bending →Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages Packages Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.       Design Design department is fully equipped with the latest computer software. Highly qualified and experienced design engineers and draftsmen work together to generate very optimal tower designs considering the customer`s requirements and standard specifications (national / international) and with well controlled utilization of raw materials, to achieve economical tower design Quality Control & Testing Customer`s complete satisfaction is our goal. Quality is employed at every stage of production to ensure the product compliance to the specifications/standards. Careful inspections are carried out by highly trained inspection engineers as per the defined procedures from raw material stage to finished product and delivery. Prototype assembly of towers is carried out in the plant. Galvanizing Galvanizing is done according to international standards.The galvanising is in accordance with ISO 1459 and ISO 1461 and is not less that 600 g/square meter of steel surfance area.

Steel Angle Bar Structure

Certificate: ISO9001:2008

Product Description: Steel Angle Bar Structure Product Description 1. Type: conical or polygonal; 2. Material: Q235, Q345 or GR65; 3. Out coating:Hot dip galvanized. Product Description for our 500kV Substation Structure Pole`s height 5-60m Type Low ,Middle and higher Voltage Shape of pole Conical, Round, Polygonal (Octagonal, Dodecagonal, etc). Crossarm Designas per customers` requirement Material Steel materials conform to ASTM A36, ASTM A572. Q235 equivalent to SS400, S235JO.  Q345 equivalent to S355JR,Grade 50 Q460 equivalent to S460, Grade 65 Wall thickness  2.5mm , 2.75mm, 3.0mm, 3.5mm, 3.75mm, 4.0mm, 4.5mm, 4.75mm, 5.0mm,etc Sections ≤11900mm can be with one section and loaded into 40HQ container. ≥12000mm need be designed with 2 sections. Unless use Flat Rack Container. Welding Welding complies with CSA and AWS D1.1 standard. Joint  Joint with Slip Joint or flange mode. Installation 1.  Burial Type. 2.  Base plate is square or round with slotted holes for anchor bolt and dimension as per client`s requirement. Galvanizing Hot dip galvanization in accordance with Chinese standard GB/T 13912-2002 or American standard ASTM A123. Min Yield Stress  345 Mpa Min Tensile Strength  470 Mpa ~ 630 Mpa Voltage 220KV Limited Weight 26 Ton/Container Certificates  ISO 9001-2008 , AAA credit rating, etc Protection Anti-corrosion and rust free – suitable for coastal area, desert, oil field and industrial area Design Design department is fully equipped with PLS-Pole software. Highly qualified and experienced design engineers and draftsmen work together to generate very optimal tower designs considering the customer`s requirements and standard specifications (national / international) and with well controlled utilization of raw materials, to achieve economical tower design abricators and workforce to achieve schedule targets through careful planning Quality Control & Testing Customer`s complete satisfaction is our goal. Quality is employed at every stage of production to ensure the product compliance to the specifications/standards. Careful inspections are carried out by highly trained inspection engineers as per the defined procedures from raw material stage to finished product and delivery. Prototype assembly of towers is carried out in the plant. Galvanizing Galvanizing is done according to international standards.The galvanising is in accordance with ISO 1459 and ISO 1461 and is not less that 600 g/square meter of steel surfance area.

Climbing Ladders for Poles

Certificate: ISO9001:2008

Product Description: Climbing Ladders for Poles Products Specification 1. Type: conical or polygonal; 2. Material: Q235, Q345 or GR65; 3. Out coating:Hot dip galvanized. Product Description for our 500kV Substation Structure Pole`s height 5-60m Type Low ,Middle and higher Voltage Shape of pole Conical, Round, Polygonal (Octagonal, Dodecagonal, etc). Crossarm Designas per customers` requirement Material Steel materials conform to ASTM A36, ASTM A572. Q235 equivalent to SS400, S235JO.  Q345 equivalent to S355JR,Grade 50 Q460 equivalent to S460, Grade 65 Wall thickness  2.5mm , 2.75mm, 3.0mm, 3.5mm, 3.75mm, 4.0mm, 4.5mm, 4.75mm, 5.0mm,etc Sections ≤11900mm can be with one section and loaded into 40HQ container. ≥12000mm need be designed with 2 sections. Unless use Flat Rack Container. Welding Welding complies with CSA and AWS D1.1 standard. Joint  Joint with Slip Joint or flange mode. Installation 1.  Burial Type. 2.  Base plate is square or round with slotted holes for anchor bolt and dimension as per client`s requirement. Galvanizing Hot dip galvanization in accordance with Chinese standard GB/T 13912-2002 or American standard ASTM A123. Min Yield Stress  345 Mpa Min Tensile Strength  470 Mpa ~ 630 Mpa Voltage 220KV Limited Weight 26 Ton/Container Certificates  ISO 9001-2008 , AAA credit rating, etc Protection Anti-corrosion and rust free – suitable for coastal area, desert, oil field and industrial area Design Design department is fully equipped with PLS-Pole software. Highly qualified and experienced design engineers and draftsmen work together to generate very optimal tower designs considering the customer`s requirements and standard specifications (national / international) and with well controlled utilization of raw materials, to achieve economical tower design abricators and workforce to achieve schedule targets through careful planning Quality Control & Testing Customer`s complete satisfaction is our goal. Quality is employed at every stage of production to ensure the product compliance to the specifications/standards. Careful inspections are carried out by highly trained inspection engineers as per the defined procedures from raw material stage to finished product and delivery. Prototype assembly of towers is carried out in the plant. Galvanizing Galvanizing is done according to international standards.The galvanising is in accordance with ISO 1459 and ISO 1461 and is not less that 600 g/square meter of steel surfance area.

Arm Bracket for Lighting Pole

Certificate: ISO9001:2008

Product Description: Advantages for our Arm Bracket for Lighting Pole 1) Higher quality lower cost to win the competitive price 2) 3 production lines to ensure fast delivery 3) Skilled manufacturer, quality control and technical team 4) Warranty of quality : more than 20 years Production Process for our Arm Bracket for Lighting Pole Material preparation-bending-welding-repair and grinding-reforming-flushing-fix bottom plate-welding bottom plate-opening door-welding door strip, electric strip, and locking-bending arm-hot dip galvanization-plastic powder painted-inspection-shipment. Products Specification: Height From 6 meter to 18 meter Suit for Airport, seaport, stadium, highway, roadway, supermarket, parking lot, etc Shape Polygonal, Conical or Column Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Lamp power 20 W- 1000 W (HPS/MH) 220V (+-10%) /50Hz Tolerance of the dimension According to client`s requirement. Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by client required. Joint of Poles Slip joint, flange connected Standard ISO 9001:2008 Length of per section Within 14 meter once forming Welding Standard AWS (American Welding Society ) D 1.1 Thickness 1 mm to 36mm Production Process Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages Packages Packing with plastic paper or according to client`s request.

Wind and Solar Lighting Mast

Certificate: ISO9001:2008

Product Description: Production Process for our Wind and Solar Lighting Mast Material preparation-bending-welding-repair and grinding-reforming-flushing-fix bottom plate-welding bottom plate-opening door-welding door strip, electric strip, and locking-bending arm-hot dip galvanization-plastic powder painted-inspection-shipment. Advantages for our Wind and Solar Lighting Mast 1) Higher quality lower cost to win the competitive price 2) 3 production lines to ensure fast delivery 3) Skilled manufacturer, quality control and technical team 4) Warranty of quality : more than 20 years Products Specification: Height From 6 meter to 18 meter Suit for Airport, seaport, stadium, highway, roadway, supermarket, parking lot, etc Shape Polygonal, Conical or Column Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Lamp power 20 W- 1000 W (HPS/MH) 220V (+-10%) /50Hz Tolerance of the dimension According to client`s requirement. Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by client required. Joint of Poles Slip joint, flange connected Standard ISO 9001:2008 Length of per section Within 14 meter once forming Welding Standard AWS (American Welding Society ) D 1.1 Thickness 1 mm to 36mm Production Process Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages Packages Packing with plastic paper or according to client`s request.

12m Hinged Lighting Mast

Certificate: ISO9001:2008

Product Description: Production Process for our 12m Hinged Lighting Mast Material preparation-bending-welding-repair and grinding-reforming-flushing-fix bottom plate-welding bottom plate-opening door-welding door strip, electric strip, and locking-bending arm-hot dip galvanization-plastic powder painted-inspection-shipment. Advantages for our L Type CCTV Steel Mast 1) Higher quality lower cost to win the competitive price 2) 3 production lines to ensure fast delivery 3) Skilled manufacturer, quality control and technical team 4) Warranty of quality : more than 20 years Products Specification: Height From 6 meter to 18 meter Suit for Airport, seaport, stadium, highway, roadway, supermarket, parking lot, etc Shape Polygonal, Conical or Column Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Lamp power 20 W- 1000 W (HPS/MH) 220V (+-10%) /50Hz Tolerance of the dimension According to client`s requirement. Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by client required. Joint of Poles Slip joint, flange connected Standard ISO 9001:2008 Length of per section Within 14 meter once forming Welding Standard AWS (American Welding Society ) D 1.1 Thickness 1 mm to 36mm Production Process Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages Packages Packing with plastic paper or according to client`s request.

138kV Steel Tubular Pole

Certificate: ISO9001:2008

Product Description: General Information for 138kV Steel Tubular Pole   Type Straight Pole ,Tensile Pole , Termial Pole Suit for Electricity distribution and Transmission Shape Columniform, polygonal or conical   Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of dimenstion According to Client's speification Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg appliced to 50cm from the to pole Marks Nane palte through rivert or glue ,engrave ,emboss as per customer requirement Surface treatment Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. Joint of Poles Slip Joint, Flange Joint . Design of pole Against earthquake of 8 grade Wind Speed 160 Km/Hour . 30 m /s Minimum yield strength 355 mpa Minimum ultimate tensile strength 490 mpa Max ultimate tensile strength 620 mpa Standard ISO 9001 Length of per section Within 14m once forming without slip joint Welding We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 Thickness 1 mm to 30 mm Production Process Rew material test → Cuttingj →Molding or bending →Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages Packages Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.   Design Design department is fully equipped with PLS-Pole software. Highly qualified and experienced design engineers and draftsmen work together to generate very optimal tower designs considering the customer`s requirements and standard specifications (national / international) and with well controlled utilization of raw materials, to achieve economical tower design abricators and workforce to achieve schedule targets through careful planning Quality Control & Testing Customer`s complete satisfaction is our goal. Quality is employed at every stage of production to ensure the product compliance to the specifications/standards. Careful inspections are carried out by highly trained inspection engineers as per the defined procedures from raw material stage to finished product and delivery. Prototype assembly of towers is carried out in the plant. Galvanizing Galvanizing is done according to international standards.The galvanising is in accordance with ISO 1459 and ISO 1461 and is not less that 600 g/square meter of steel surfance area.

Galvanized Substation Steel Structure

Certificate: ISO9001:2008

Product Description: Product Description for Galvanized Substation Steel Structure     Products  Electric Pole for Transmission Line Project Type Suspension electric pole,Tensile electric pole, Strain electric pole , Angleelectric pole, Dead-end electric pole, etc Voltage Grade 10~500KV (10KV, 13.8KV,33KV, 35KV, 66KV, 110KV,132KV, 220KV, 230KV, 330KV, 500KV or Others ) Shape Conical, Round, Polygonal (Octagonal, Dodecagonal, Hexadecagonal, etc) Material Hot Roll Steel Q235, Q345, Q420, Q460, ASTM A527 A36, GR50, GR65, ST-37, ST-44, ST-52, S355JR, S355J2G3, SS41, SS50, SS55 and others equivalent steel material Wall thickness 2~30mm Once Forming 16m Once forming without joint Welding Welding of electric pole complies with AWS D1.1 standard.  CO2 welding or submerged arc auto methods No fissure, scar, overlap, layer or other defects Internal and external welding makes electric pole more beautiful in shape If customers need any other requirements of welding, we also can make adjustment ad your request Joint   Joint with slip or flange. Base plate Base plate of electric pole is square/round/Polygon with slotted holes for anchor bolt and dimension as per client`s requirement. Galvanization Hot dip galvanization in accordance with Chinese standard GB/T 13912-2002 and American standard ASTM A123. Painting According to clients' request Life Period More than 25 years, it is according to installing environment Certificates  ISO9001-2008 , AAA credit rating, etc   Our Services 1. Reply your inquiry in 24 working hours. 2. Experienced staffs answer all your questions in fluent English. 3. Customized design is available. UEM&UBM are welcomed. 4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff. 5. Special discount and protection of sales are provided to our distributor. 6. Professional factory : We are manufacturer, specializing in producing all kinds of steel poles for more than 20 years,  competitive with good quantity.

Powder Coated CCTV Pole

Certificate: ISO9001:2008

Product Description: Products Specification for our Powder Coated CCTV Pole: Height From 6 meter to 18 meter Suit for Airport, seaport, stadium, highway, roadway, supermarket, parking lot, etc Shape Polygonal, Conical or Column Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Lamp power 20 W- 1000 W (HPS/MH) 220V (+-10%) /50Hz Tolerance of the dimension According to client`s requirement. Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by client required. Joint of Poles Slip joint, flange connected Standard ISO 9001:2008 Length of per section Within 14 meter once forming Welding Standard AWS (American Welding Society ) D 1.1 Thickness 1 mm to 36mm Production Process Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages Packages Packing with plastic paper or according to client`s request. Production Process for our Powder Coated CCTV Pole  Material preparation-bending-welding-repair and grinding-reforming-flushing-fix bottom plate-welding bottom plate-opening door-welding door strip, electric strip, and locking-bending arm-hot dip galvanization-plastic powder painted-inspection-shipment. Advantages for our Powder Coated CCTV Pole 1) Higher quality lower cost to win the competitive price 2) 3 production lines to ensure fast delivery 3) Skilled manufacturer, quality control and technical team 4) Warranty of quality : more than 20 years

9m Traffic Signal Pole

Certificate: ISO9001:2008

Product Description: Advantages for our 9m Traffic Signal Pole  1) Higher quality lower cost to win the competitive price 2) 3 production lines to ensure fast delivery 3) Skilled manufacturer, quality control and technical team 4) Warranty of quality : more than 20 years Production Process Material preparation-bending-welding-repair and grinding-reforming-flushing-fix bottom plate-welding bottom plate-opening door-welding door strip, electric strip, and locking-bending arm-hot dip galvanization-plastic powder painted-inspection-shipment. Products Specification: Height From 6 meter to 18 meter Suit for Airport, seaport, stadium, highway, roadway, supermarket, parking lot, etc Shape Polygonal, Conical or Column Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Lamp power 20 W- 1000 W (HPS/MH) 220V (+-10%) /50Hz Tolerance of the dimension According to client`s requirement. Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by client required. Joint of Poles Slip joint, flange connected Standard ISO 9001:2008 Length of per section Within 14 meter once forming Welding Standard AWS (American Welding Society ) D 1.1 Thickness 1 mm to 36mm Production Process Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages Packages Packing with plastic paper or according to client`s request.

ASME Flat Face Welding Neck Flange

Certificate: ISO9001:2008

Product Description: Name: ASME Flat Face Welding Neck Flange Materials: stainless steel 304, 304L, 316, 316L, carbon steel Size range: DN15 to DN2000  Coating: black paint, yellow transparent paint, cold and hot dip galvanized  Size: 1/2"-60" Materials: stainless steel and carbon steel Standard: ANSI, BS, DIN, EN1092-1, JIS Place of origin: Hebei, China (Mainland) Model number: forged flange Standard or nonstandard: standard Technique: forging Pressure: PN10, PN16, PN25, PN40 Type: blind flange Application: for seal or connect of pipe/tub-e lines Sample: yes Certifications: ISO 9001 Packing: wooden case Types specification: Welding neck 1. Preferred for high-pressure, subzero or elevated temperature 2. Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion 3. Easily radio graphed and provides excellent stress distribution Slip-on 1. Not normally used in high-stress applications due to low hub and weld attachment 2. Slips over outside of pipe 3. Inside of flange welded at hub and end of pipe Lap joint 1. Used where bolt alignment or access for cleaning is required 2. Similar to slip-on flange when used with lap joint stub end 3. Radius at intersection of flange face and bore to match lap joint stub end Threaded 1. Used where welding would be hazardous 2. Designed for low-pressure and non-cyclic applications 3. Bore is threaded to match pipe thread 4. Tapered to seal pipe and flanges Socket welding: 1. For small-diameter chemical processes, hydraulic and stream distribution lines 2. Similar to slip-on flange 3. Counter bore matches pipe bore, allowing unrestricted flow 4. Counter bore from hub side fits pipe's outer diameter: can insert pipe in socket with fillet weld at hub Blind 1. Used to close ends of piping 2. Has no bore 3. Permits access to sealed lines Other flanges: Orifice, expander, reducing, lightweight, studding outlets, long weld necks, metric, navy drawings, customer drawings Standards: ANSI, BS, DIN, EN1092-1, JIS ANSI flanges Dimensions: ANSI B16.5, B14.47, B16.36, B16.48 Class: 150, 300, 400, 600, 900, 1500, 2500 Flange type: weld neck, threaded, slip-on, lap joint, socket weld, blind BS flanges Dimensions: BS4504 PN: 2.4, 6, 10, 16, 25, 40 Flange type: weld neck, threaded, slip-on, lap joint, socket weld, blind DIN flanges Description: blind flange

Stainless Steel Fittings and Pipes

Certificate: ISO9001:2008

Product Description: Key Specifications/Special Features for Stainless Steel Fittings and Pipes: Size: 1/2"-60" Materials: stainless steel and carbon steel Standard: ANSI, BS, DIN, EN1092-1, JIS Place of origin: Hebei, China (Mainland) Model number: forged flange Standard or nonstandard: standard Technique: forging Pressure: PN10, PN16, PN25, PN40 Type: blind flange Application: for seal or connect of pipe/tub-e lines Sample: yes Certifications: ISO 9001 Packing: wooden case Name: flange Materials: stainless steel 304, 304L, 316, 316L, carbon steel Size range: DN15 to DN2000  Coating: black paint, yellow transparent paint, cold and hot dip galvanized  Types specification: Welding neck 1. Preferred for high-pressure, subzero or elevated temperature 2. Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion 3. Easily radio graphed and provides excellent stress distribution Slip-on 1. Not normally used in high-stress applications due to low hub and weld attachment 2. Slips over outside of pipe 3. Inside of flange welded at hub and end of pipe Lap joint 1. Used where bolt alignment or access for cleaning is required 2. Similar to slip-on flange when used with lap joint stub end 3. Radius at intersection of flange face and bore to match lap joint stub end Threaded 1. Used where welding would be hazardous 2. Designed for low-pressure and non-cyclic applications 3. Bore is threaded to match pipe thread 4. Tapered to seal pipe and flanges Socket welding: 1. For small-diameter chemical processes, hydraulic and stream distribution lines 2. Similar to slip-on flange 3. Counter bore matches pipe bore, allowing unrestricted flow 4. Counter bore from hub side fits pipe's outer diameter: can insert pipe in socket with fillet weld at hub Blind 1. Used to close ends of piping 2. Has no bore 3. Permits access to sealed lines Other flanges: Orifice, expander, reducing, lightweight, studding outlets, long weld necks, metric, navy drawings, customer drawings Standards: ANSI, BS, DIN, EN1092-1, JIS ANSI flanges Dimensions: ANSI B16.5, B14.47, B16.36, B16.48 Class: 150, 300, 400, 600, 900, 1500, 2500 Flange type: weld neck, threaded, slip-on, lap joint, socket weld, blind BS flanges Dimensions: BS4504 PN: 2.4, 6, 10, 16, 25, 40 Flange type: weld neck, threaded, slip-on, lap joint, socket weld, blind DIN flanges Description: blind flange

304 Stainless Steel Pipe Flange

Certificate: ISO9001:2008

Product Description: Key Specifications/Special Features for 304 Stainless Steel Pipe Flange: Size: 1/2"-60" Materials: stainless steel and carbon steel Standard: ANSI, BS, DIN, EN1092-1, JIS Place of origin: Hebei, China (Mainland) Model number: forged flange Standard or nonstandard: standard Technique: forging Pressure: PN10, PN16, PN25, PN40 Type: blind flange Application: for seal or connect of pipe/tub-e lines Sample: yes Certifications: ISO 9001 Packing: wooden case Name: flange Materials: stainless steel 304, 304L, 316, 316L, carbon steel Size range: DN15 to DN2000  Coating: black paint, yellow transparent paint, cold and hot dip galvanized  Types specification: Welding neck 1. Preferred for high-pressure, subzero or elevated temperature 2. Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion 3. Easily radio graphed and provides excellent stress distribution Slip-on 1. Not normally used in high-stress applications due to low hub and weld attachment 2. Slips over outside of pipe 3. Inside of flange welded at hub and end of pipe Lap joint 1. Used where bolt alignment or access for cleaning is required 2. Similar to slip-on flange when used with lap joint stub end 3. Radius at intersection of flange face and bore to match lap joint stub end Threaded 1. Used where welding would be hazardous 2. Designed for low-pressure and non-cyclic applications 3. Bore is threaded to match pipe thread 4. Tapered to seal pipe and flanges Socket welding: 1. For small-diameter chemical processes, hydraulic and stream distribution lines 2. Similar to slip-on flange 3. Counter bore matches pipe bore, allowing unrestricted flow 4. Counter bore from hub side fits pipe's outer diameter: can insert pipe in socket with fillet weld at hub Blind 1. Used to close ends of piping 2. Has no bore 3. Permits access to sealed lines Other flanges: Orifice, expander, reducing, lightweight, studding outlets, long weld necks, metric, navy drawings, customer drawings Standards: ANSI, BS, DIN, EN1092-1, JIS ANSI flanges Dimensions: ANSI B16.5, B14.47, B16.36, B16.48 Class: 150, 300, 400, 600, 900, 1500, 2500 Flange type: weld neck, threaded, slip-on, lap joint, socket weld, blind BS flanges Dimensions: BS4504 PN: 2.4, 6, 10, 16, 25, 40 Flange type: weld neck, threaded, slip-on, lap joint, socket weld, blind DIN flanges Description: blind flange

18m Pneumatic Locking Mast

Certificate: ISO9001:2008

Product Description: 18m Pneumatic Locking Mast This mast is designed for antenna installation. Mast extend 18m height with 2.75m retracted height.  This mast composed by 11 sections which diameter range from 36mm to 229mm from top to bottom. Mast weight about 180kg, can be mounted on the ground with tripod bracket or be installed on a vehicle inside or back. The mast will equip a guying lines with 3 layers and 4 ways to make it stronger when in application. Products Name: 18m Pneumatic Locking Mast Type: Auto-Locking Collar 1. Extended Height: 18m 2. Retracted Height: 2.75m 3. Head Loads: 30 kgs 4. Maximum working pressure: 0.2Mpa/29PSI 5. Working temperature: -25~850C 6. Sections: 11 sections ( Base tube 229mm diameter) 7. Mast Weight: 180kgs approx. 8. Default Accessories: 1 x Top flange, 1 x Bottom flange, 1x air hose pipe 90111300 10kg/22lb 30m/98.4` 4.2m/13.8` 280kg/616lb 11 36~229mm/1.42~9.02" Locking 0.2MPa/29PSI 90111250 30kg/66lb 25m/82` 3.35m/11` 240kg/528lb 11 36~229mm/1.42~9.02" Locking 0.2MPa/29PSI 90111210 30kg/66lb 21m/68.9` 3.1m/10.2` 212kg/466lb 11 36~229mm/1.42~9.02" Locking 0.2MPa/29PSI 90111180 30kg/66lb 18m/59` 2.8m/9.2` 195kg/429lb 11 36~229mm/1.42~9.02" Locking 0.2MPa/29PSI 90111150 30kg/66lb 15m/49.2` 2.45m/8` 175kg/385lb 11 36~229mm/1.42~9.02" Locking 0.2MPa/29PSI 90110150 50kg/110lb 15m/49.2` 2.6m/8.53` 179kg/394lb 10 51~229mm/2.01~9.02" Locking 0.2MPa/29PSI

LED Street Light Pole

Certificate: ISO9001:2008

Product Description: LED Street Light Pole Our LED street light poles made from 14m bending machine plasma cuting machine and submerged welding machine.  We have got CE accreditation from 2009 for our 12m galvanized steel lighting poles. We have exported our LED street light poles to Australia England Columbia Iraq Phillipines Paskistan and etc. Products Specification: Height From 6 meter to 18 meter Suit for Airport, seaport, stadium, highway, roadway, supermarket, parking lot, etc Shape Polygonal, Conical or Column Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Lamp power 20 W- 1000 W (HPS/MH) 220V (+-10%) /50Hz Tolerance of the dimension According to client`s requirement. Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by client required. Joint of Poles Slip joint, flange connected Standard ISO 9001:2008 Length of per section Within 14 meter once forming Welding Standard AWS (American Welding Society ) D 1.1 Thickness 1 mm to 36mm Production Process Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages Packages Packing with plastic paper or according to client`s request.

Transmission And Distribution Pole
Stainless Steel Flange

Send Inquiry

Your message must be between 20-3000 characters